Chipboard is widely used in construction and for the manufacture of furniture. There is a wide variety of such plates on the market, differing among themselves not only in cost, but also in quality. One of the manufacturers is a company from Austria with a worldwide reputation - Egger. Her product range is very diverse. The company's product catalog contains more than 200 types of various plates, among which there are plain, colored, with a pattern, imitating the texture of wood and other materials, surfaces. Surfaces can be matte or glossy. Picking up the desired chipboard sheet, suitable for the interior of the buyer, is not difficult.
Egger chipboards are of high quality, meeting all the requirements of standards (SNiP and EN). The range of products offered by the company is constantly increasing due to new technologies and developments. The following products are produced:
Chipboard has the following technical characteristics:
The scope of Egger chipboard is wide:
Egger chipboard colors vary depending on the type of board. There are more than 200 of them. The catalog includes the following variations:
Simultaneously with the decor, chipboards differ in their texture. Egger offers the following types:
Plates from this series are used for the production of high quality furniture. The Egger chipboard sheet consists of a high-density inner layer covered on top with fine-grained layers. This allows you to get a perfectly flat surface that holds its shape well. At the same time, the boards have an even cut and are easy to process (lamination, edge finishing, veneer, postforming).
This series has a standard width of 207 cm, a thickness of 0.8-2.5 cm and a length of 561, 411 or 280 cm.
Plates of the Eurospan series for worktops and window sills perfectly withstand mechanical loads and the effects of chemicals (acids, alkalis, abrasive detergents), without losing their aesthetic appeal. And they serve more than 10 years. You can damage the surface with a knife, hot dishes or a cigarette.
They have dimensions of 410x60, 410x91, 410x120 cm with a thickness of 3.8 cm.
Window sill dimensions: thickness - 1.9 and 2.2 cm, length - 410 cm, width - 16-10 cm.
Chipboard Egger Eurolight series, which are also called light boards, consist of two layers:
This structure makes the plates light, standard fasteners and fittings are suitable for them. They are used for the production of furniture, interior decoration.
Wood chipboards have a number of advantages. But despite this, many consumers argue that laminated chipboard is harmful to health. They associate this with supposedly prominent ones, but this is far from being the case. Chipboard is an environmentally friendly material.
When choosing chipboard, give preference to the material that is produced directly by the Austrian company Egger. According to popular reviews, such material is much superior in quality to goods manufactured at other manufacturing plants. Naturally, the price of such products will be higher than those produced in Russia. But the choice always remains with the buyer.
Egger has been counting its history since 1961, when in the city of St. Johann (Austria) launched the first chipboard press. Today, 50 years later, Egger is Europe's leading manufacturer of wood-based materials. The company's enterprises employ about 6,500 employees in 22 countries around the world.
Under the Egger brand, wood-based materials are produced for construction, interior decoration and furniture production. The company's factories produce MDF, chipboard, furniture edges, furniture plastic, acoustic panels, vestibule and OSB boards.
The most important activity of the company is the production of materials for the furniture industry. Egger factories produce a huge range of materials for furniture. The company manufactures products from wood, which each of us meets in everyday life, from front doors to furniture for kitchens and bathrooms. The company pays great attention to the compatibility of materials for each area of their application. Thus, laminated boards, combined boards, and edges that are ideally suited in terms of pattern and texture can always be matched to lined boards. Egger provides customers with a similar decoration for all types of products. Among the assortment of the company you can always find several options for decors and structures that are in perfect harmony with each other.
Company foundation EGGER founded by Fritz Egger Sr. in 1961, when he opened his first chipboard plant in St. Johann in Tyrol. Gradually the company EGGER has grown into a group of enterprises with 17 factories located in seven different countries, with a total workforce of 6,500 people.
At present, the group of enterprises EGGER is owned by the brothers Michael Egger and Fritz Egger, who, being the owners of the company, determine its strategic objectives. The day-to-day management of the family business is carried out by the Group Management EGGER represented by Thomas Leissing, Ulrich Bühler and Walter Schiegl.
The company has a decentralized management, structurally it is divided into separate areas of activity and organizational units located in different regions.
Only those functions are under centralized control, in the performance of which it is possible to obtain a synergy effect or an increase in productivity, as well as functions caused by a strategic need.
Strategic management is carried out by the owners of the company with the support of the management and management units of the Group.
The goals that are set for the enterprises of the company are determined jointly, and are implemented independently.
In accordance with the basic principles, the company respects the traditions and customs of the countries in which it operates.
The Egger Group integrates into the life of the environment in which it is located, contributing to the involvement of qualified personnel - from ordinary employees to managers - from the regions where the company's plants are located.
The principle of careful attitude to raw materials is in the company EGGER paramount importance. This principle is brought to life by generating energy from our own biomass thermal power plants, as well as through the use of the most modern resource-saving production technologies and environmentally friendly logistics systems.
Company EGGER consciously invests in advanced information and communication systems. Thanks to this, the effective management of the company and the inclusion of partners in the relevant processes of product creation are carried out.
1961 Commissioning of the first chipboard press in St. Johann (Austria)
1966 Acquisition of the fiberboard plant in Wörgl (Austria)
1970 Commissioning of the chipboard plant in Unterradlberg (Austria)
1984 Acquisition and construction of a chipboard plant in Hexham (UK)
1989 Acquisition of the laminate plant in Gifhorn (Germany)
1990 Commissioning of the chipboard plant in Brilon (Germany)
1994 Acquisition of a factory for the production of prefabricated furniture elements in Bünde (Germany)
Acquisition of a chipboard plant in Rion-de-Landes (France)
1995 Acquisition of the thin MDF board plant in Bevern (Germany)
1998 Commissioning of the chipboard plant in Barony (UK)
1999 Commissioning of the "European plant" EGGER in Wismar (Germany)
Acquisition of a wood-based panel finishing plant in Marienmünster (Germany)
2000 Acquisition of a chipboard plant in Ramberville (France)
2002 Complete reconstruction and expansion of the chipboard plant in Unterradlberg (Austria)
2005 Commissioning of the chipboard plant in Shuya (Russia)
2006 Start of production of EUROLIGHT lightweight boards in St. Johann (Austria)
Start of production of laminate flooring using DPR direct printing technology in Brilon (Germany)
2007 Expansion of production capacity at the plant in Gifhorn (Germany) by investing in a new laminate plant.
Expansion and modernization of the plant in Hexham (UK)
2008 Start of chipboard production at the plant in Radauti (Romania)
Commissioning of the Group's first own sawmill in Brilon (Germany)
2009 Start of chipboard production at the plant in Radauti (Romania)
Start of design work for the installation of an adhesive production plant and a biomass thermal power plant in Radauti (Romania)
All text and graphic information provided by the company EGGER.
Egger is a large European company specializing in the production of laminate flooring and many other finishing materials. The company's factories are located in Austria, Germany, Italy, Sweden, Russia and other European countries. Experts say that the total annual production of Egger-branded laminate is more than 30 million m2. Egger laminate can boast of high European quality, reliability, durability, variety of textures and decors.
Laminated floors of this manufacturer have been presented on the domestic market for more than 15 years. They are in consistently high demand among individuals and legal entities, because the laminate produced by Europeans is excellent for laying in residential premises, public buildings, and the commercial sector.
It is important to note that the company is engaged in the production of laminates of 32 and 33 wear resistance classes, which are exactly designed for use in residential premises of any type and in commercial areas with low and medium floor loads.
Modern manufacturing technologies using environmentally friendly raw materials and safe formulations, coupled with innovative high-precision equipment, allow Egger to produce high-quality laminate with a guaranteed service life of more than 15 years. All manufactured models have increased resistance to moisture from the outside and inside, as well as from the ends and the interlock.
Egger laminate is so safe and hygienic that it meets all international and domestic sanitary and epidemiological standards, so it can be installed in medical and childcare facilities. The manufacturer's laminated floors have the Blue Angel environmental certificate.
Egger has been operating on the European market for a long time, which allows it to dictate the fashion for certain floor coverings, create trends and introduce innovative solutions in laminate production technology. Key features of these laminate flooring include:
Laminate from Egger, like other manufacturers, consists of 4 main layers:
Egger laminate flooring models are so diverse that people who can’t decide on a laminate for a long time find something suitable in the assortment of this manufacturer.
All models from the Austrian company on the market can be classified according to several criteria:
32 and 33 classes of laminate in the modern market are the most popular. That is why Egger laminate can be used in a wide range of spaces:
Egger laminate flooring is one of the best on the market today. Despite the excellent performance, test results and a wide range of operation, the presented models have a fairly affordable price (middle price category). This allows the manufacturer to find many customers among private and corporate consumers.
Specialty shop for laminate flooring Egger Laminate offers its customers a wide range of quality laminate flooring for commercial premises and private households. Its excellent performance and a large selection of different design designs allows you to choose the best option for any interior solutions. At the same time, you can be completely confident in its unsurpassed practicality and durability, which is confirmed by the appropriate warranty.
Egger began its development in 1961 - from the moment it was founded in Austria, as a small family business for the production of chipboard. Further development allowed the opening of several production associations throughout Europe, specializing in the manufacture of various floor materials, including laminated parquet. Subsequently, a modern laminate manufacturing plant was opened in Russia, which makes it possible to produce competitive products with an excellent level of quality.
Egger laminate has earned high popularity among consumers due to its excellent functionality, durability and unique design that mimics natural materials exactly. This allows these products to be among the most popular in the domestic and European markets.
Each lamella of the presented flooring consists of several layers that perform a specific function. The bottom - the main layer, provides the material with high stability and structural strength, and a special moisture-resistant impregnation allows you to reliably withstand an increased level of humidity. The formulation of this composition is a unique development of the company and is protected by patent law.
The decorative layer, perfectly reproducing the pattern and relief of natural wood, makes such a coating almost indistinguishable from a massive board or parquet. This is achieved through the use of a special technology of synchronous superposition of the surface structure and the required decor. For such “embossing”, computerized equipment is used, which allows perfectly precise control of all stages of the technological process.
The top protective coating allows the laminate to reliably resist various mechanical damage and withstand high physical exertion. This predetermines the possibility of its use for various public and even industrial premises, where there are special requirements for the wear resistance of the materials used.
One of the unique varieties of Egger laminated parquet is the exclusive one, which is resistant to the negative effects of high levels of humidity or direct contact of the coating with water. This flooring material will be an ideal choice for flooring in kitchens, bathrooms, as well as in corridors and halls of public premises.
Choosing a laminate from this manufacturer, you can take advantage of the following advantages of the specified flooring:
On our website you can pick up and purchase on mutually beneficial terms, as well as use the service of its prompt delivery. Our employees are always ready to help you with the choice of the most suitable laminate flooring option, taking into account your individual requests and wishes.