home ›Design ›Apron ›How to fix an apron in the kitchen without the help of a master: a complete description of the installation process

The reasons for installing an apron or replacing it are different: repairing an apartment, moving to a new building, or simply deciding to update the look of the kitchen. Modern possibilities thanks to a large selection of aprons will make your kitchen truly unique and unrepeatable design. Especially if your kitchen is small, a modern renovation is simply necessary to visually increase the area and make it as comfortable as possible for living, especially Khrushchev.

Attaching an apron is a simple process that can be done without the help of a specialist. The complexity of installation depends on the selected material. The whole process is divided into three stages:

It is imperative to remove the old coating if the old material is being replaced with a new version;
Acrylic primer is applied to the cleaned surface;
If you want to fix an apron made of ceramic tiles or mosaics, then a prerequisite for the preparatory work is the alignment of the base. To do this, you need a plaster mortar, which includes gypsum.

Plaster is used when the apron is glass. The basis under glass is required ideally equal. This material is distinguished by its fragility. Therefore, a glass element placed on an uneven wall surface may crack. This will entail unforeseen costs and significantly complicate the installation process.

What is required for installation?

Repair work must be carried out very carefully. The installer will need some tools:

The building level will help not to make a mistake during installation, measure everything correctly and fix the wall panel evenly and accurately;
Using a hand saw, the installer will be able to saw off the right amount of measured material, if possible it is better to get a jigsaw or a circular saw. The cut edge when using these tools will be smoother and more accurate;
It is desirable to have a puncher, but an ordinary drill is also suitable, to which the appropriate components (drills) must be attached;
To facilitate the mixing of plaster or glue, you need a special mixer nozzle. She puts on a drill, using it is quite simple, it will not cause any difficulty even for a beginner;
The construction knife is distinguished by its sharpness, so when using this tool, one should not forget about safety;
A tape measure will help you make accurate measurements, which will protect the material from deformation during installation;
If you need to work with ceramics, then you need to get a special tile cutter;
Two types of spatulas should be purchased: notched and smooth options.

The acquisition of these tools will not be an expensive pleasure for the consumer. Much may already be in a man's arsenal. When using construction tools, you should remember safety precautions and work carefully.

Working with sheet plastic

Installing an apron in the kitchen using sheet plastic does not take much time. A distinctive feature is the possibility of installation without preliminary preparation of the base, it is not necessary to align the walls to the level. Work begins with measurements, you should deal with the required dimensions. Further, using a hacksaw or electric jigsaw, the plastic is cut according to the required dimensions.

Installing the apron in the kitchen is carried out using a special glue - liquid nails. If you do not learn how to make the design integral, then you can arrange the joints using the H-profile. Sheets can be planted not only on glue, but also on self-tapping screws. To hide the hats, you can use ordinary furniture caps, which are selected according to the color scheme used. You can decorate the apron with the layouts used for tubing tiles.

The use of MDF panels

You can attach the apron to the wall only after installing the crate. A wooden lath is attached to the wall, its thickness should be at least 20 mm. It is required to install the rails in a vertical position. To give the reliability of the structure, it is required to observe the distance between the beams no more than 600 mm. The panels themselves are superimposed on the crate in a horizontal position.

The slats are pre-treated with a bioprotective compound, which significantly increases the service life of the material, preventing it from rotting or being damaged by insects. The strict vertical arrangement of the rails affects the quality of the installed apron. For fastening, you can use special elements.

To give individuality, finished MDF kitchen panels can be decorated with moldings. They are easily glued to the panel, you can decorate the apron immediately after installation.

The use of plastic panels

Plastic panels in the kitchen are attached to the wall only after the installation of the crate. The work process is no different from the above method. The next step is to install the L-profile. Its installation is carried out directly to the previously installed crate around the entire perimeter. The profile is attached using a construction stapler.

The last stage is the installation of panels. They are inserted into the profiles and additionally attached to the crate. Instead of an L-profile, you can purchase a plastic skirting board specially designed for such work. The panels are not glued directly to the backsplash base - this is very inconvenient. Dismantling of a separate part will be impossible, which will complicate the process of replacing a damaged panel.

Application of ceramic tiles and mosaics

When wondering how to fix an apron in a ceramic kitchen, it should be remembered that preliminary thorough surface preparation is required. Concrete contact is considered a good tool for treating a wall. It provides the surface with a certain roughness, thereby increasing the adhesion quality of the tile and the wall.

Thematic materials: